Trading
> Ophir Power Meter > Laser Power and Energy Heads
Laser Power and Energy Heads
- Photodiode Sensors
- Ophir's Photodiode PD-300 series heads offer spectral coverage from 200nm – 1800nm, and automatic background subtraction so the measurement is not sensitive to room light.
All models have wavelength calibration built into the system.
There is a wealth of products to cover many applications including scanned beams, telecom, tight spaces, photometric and radiometric heads.
- Photodiode and integrating sphare

- Special Photodiode Products
- Ophir has special photodiode products for special applications: the low cost PD200 head and display for those who only want to measure one or two wavelengths. The FPS-10 to measure temporal pulse shape and the Wave-Star spectrum analyzer to display light spectrum on your PC or laptop.
- Thermal Sensor Low power
- Thermal Sensor - Low Powers to 50W
- Ophir has the widest selection of heads for low average powers in the industry. From the popular 3A series that can reliably measure down to tens of microwatts and microjoules to the L50A for up to 50W continuous.
There are various shapes and sizes of heads to fit any requirement as well as special absorbers for short pulses.
- Thermal head low power

- Thermal Sensor Medium Power
- Thermal Sensors - Medium Powers to 300W
- Ophir has a wide range of thermal measurement heads.
Included are the exclusive LP1 coating with the highest damage thresholds available for long pulses and continuous radiation. There are heads with apertures up to 65mm diameter and a special head for gel coupled IPL sources.
- Thermal head medium power

- Thermal Sensor High Power
- Thermal Sensors - High Powers 500W to 10,000W
- Ophir's high power heads are the most reliable and durable available.
Included are the exclusive 10K-W head withstanding power densities at 10KW to 10KW/cm2 and the FL500A fan cooled head for up to 500 Watts.
- Thermal head high power

- Pyroelectric and Photodiode Energy Sensors
- The Pyroelectric and PD10 Series detectors combine high accuracy, damage threshold and repetition rate operation in a single head.
These heads are the most sensitive, highest rep rate, longest pulse capability and most versatile in the industry.
- Pyroelectric photodiode

- Repetitive Pulse Sensors
- RP Heads for pulsed lasers 30mW - 1500W, 10mJ - 100J, up to 15000 Hz.
Especially for high rep rate, high average power lasers.These RP heads allow measurement of laser powers up to 1500 watts, pulse energies to > 50J/pulse, pulse widths to 200ms and pulse rates to 17KHz.
- RF Heads

- Comet Portable Power Probes
- Comet Portable Power Probes
- The low cost Comet power probes are perfect for laser job shops.
They give simple and accurate power measurements up to 10KW and 10KW/cm2
- Laser Spectrum Analyzer
- The Ophir Wave-Star introduces a new level of accuracy and ease in spectral measurements. Just plug into your PC parallel port, install the software and easily and accurately measure spectra from a wide variety of sources including continuous and pulsed sources from microwatts to watts in intensity.
The program automatically tags the peaks with the wavelength so the result is readily available.
- Beam and wavelength analyzer

- Integrating Spheres
- Ophir offers several integrating sphere smart heads for measurement of divergent beams and diode lasers 1µW-100W
- Integrating Sphere
